We Make Zines

a place for zinesters - writers and readers

Indigo has always been half sized, which is relatively easy to set up in MS Word and then cut & paste. Issue #17 done and ready to print, but it's a double issue, and I want to make the second part a quarter sized zine. Can anyone offer any advice/tips/techniques? Thanks!

Views: 254

Comment

You need to be a member of We Make Zines to add comments!

Join We Make Zines

Comment by Giz on August 22, 2009 at 3:33am
mhh, make your original in fullsize, and use the copier to reduce it by 50%. then paste your pages on the same sheet and go to the copy-shop, cut & fold.
Comment by andreajean on August 21, 2009 at 8:07pm
If you're already using your computer, you can check to see if you have MS Publisher. That can be set up for a custom page size booklet pretty easily.
Comment by Monstress Zine on August 21, 2009 at 1:50pm
i found a guide here:
http://www.instructables.com/id/how-to-make-a-zine/

i'd also suggest not only folding two pieces of paper, but actually cutting them in half, numbering them and then putting the pieces of paper back together so you can get the logic of the order straight in your head and have something to refer to as you do layout. the hardest part for me is the pagination. since i do cut'n'past layout, i make sure to number the quadrant of the paper i'm pasting onto with a blue pencil. then i don't end up screwing up the final order. usually.
Comment by Michelle - Indigo zine on August 21, 2009 at 12:57pm
Hmmm...I don't have a copy, but is it online anywhere?
Comment by incurable hippie on August 21, 2009 at 12:56pm
I used the guide in Stolen Sharpie Revolution for how to do a quarter-sized zine. Do you have access to that?

Groups

Want to advertise here?

Ist preference given to distros and zines. Rates and details are here. Limited space. Very Low Cost!

Please Support Our Sponsors

Anatomic Air Press

Sweet Candy Distro

Con Artist Collective

Ker-bloom! Letterpress Zine

 

© 2014   Created by Krissy PonyBoy Press.   Powered by

Badges  |  Report an Issue  |  Terms of Service