a place for zinesters - writers and readers
So, cooked macaroni is also a bad idea?
Here's a good idea. I'm going to at least start dating when I first start working on it and when it gets finished. I have had references to where I live but that's mostly because of show reviews.
Scratch That Itch said:
1. Put a date on it! I really like seeing when a zine was made. Also put an expiry date on addresses if possible. And put the country on your address because yr zine will probably get to other countries. Americans, this means you.
2. Like Gianni said, say if yr zine is copyleft/anti-copyright/whatever, so people know if they can make more copies/steal artwork.
3. Read it before you make a load of copies to check it's legible - ie, a clear font/ dark enough/visible over pictures/etc.
4. Yeh, margins! Better safe than sorry.
5. I would really like it if more people listed crap they want to be sent/will send out, in particular things they would exchange for their zine like mix tapes/info on stuff/vegan sweets/etc.
There's plenty more I can think of but I'm starting to sound like a dick. But I have done (or rather, not done) all of these things in the past so it's not meant to be rude, ha.
i second the "put a date on it" comment! i'm reluctant to write to people, even if i loved their zine, if i don't know when the zine came out. it could have been ten years ago and.. you know, people move around a lot.
as far as ways for binding zines, i like:
stapling [long armed stapler may be necessary depending on home many pages or how big the zine is, but my friend heather just uses a standard stapler and folds her zine so that the stapler can reach the middle.] i've learned that one really only needs one staple in the middle of the crease unless it's hella thick, then maybe two.
sewing. people do this by machine or by hand. i don't know how to do it well. but it looks nice.
and! if you're going to put content all the way at the edge of the paper, make sure you use a good model copy machine [like the ones at staples!] that have the "edge erase: print to edge" option. i recommend getting to know your photo copier in general, for quality prints and fun layout tricks.
Rubber bands piss me off. Also, if not stored flat somehow, like in a display, they end up bowing low low low to the ground and eventually look like trash. One of my pet peeves for life.
Paperclips work great. You can also machine sew down the binding on some papers, if you want to get creative. Staples always work as well.
i'm new to zining, so all this advice is really great. i rubber-banded my first zine ever, never doing that again. also, margin space is really important. i'm learning that just now when i see my margins get cut off by the copying machine.
i hand cut my zine pages in small batches, but i'm looking to make bigger batches for wider distribution. do you guys invest in a paper guillotine, or are there places where i can cut paper for free?
look in print shops for industrial paper cutters they let you use! my local copy shop has a really good paper cutter they allow people who make copies there to use, and it can handle quite a few sheets at a time. even in the Staples near me, in their copy and print section, have a paper cutter. that one can't handle as many sheets of paper at once, but it's definitely better than hand cutting with scissors. and it's free to use!
1. dont burn out, only because of people do not want to read your first issue, or the next three.
-maybe you have not figured out where your audience is.
I am going to second what's already been said about fonts and stuff. If you're hand writing, make that legible, and if you don't have a good handwriting ask a friend for help or type. There are few things that are more off-putting than being really absorbed in a zine, and then suddenly there's a massive block of text in a bad hand writing and I can't bother trying to decipher it. Make sure you use a black pen or something equally strong, or that you can deal with contrast settings. Lots of handwritten stuff are very faded (needless to say, never use pencil).
Additionally, make the subject/style of your zine clear from the start. Sometimes I'm in the mood for DIY zines and find something that reads like a perzine, with only 2-3 pages of actual DIY. You don't have to do this, obviously, but it would be helpful if you could give your readers an idea of what to expect. I'm always nervous about getting zines I've never seen before, too, because every so often I see such cool features promised and then when I get there it's half of an A5 page in bullet points. Nothing wrong with that, but again, since people may look for different things depending on their taste and mood, it could make things easier.
I like zines who have a home base. A place you can visit for more information. Whether it be a blog, or a website you use, it gives the reader a chance to find out more about the zine, the author, other products available and other links to where your zine is being distributed. These blogs are free to use and it just makes since to offer a place for fans and readers to visit you and make comments, purchase other zines, or just pass through to see what's brewing. Just my opinion of course, but the zines with this link included are the ones I invest more time in.
Yes, though it has been a far more frustrating problem in my own zinemaking career. Margins are my Achilles's Heel!
Trent Rampage said:
oh - when the zine is designed in such a way that all the words are right at the edge of the pages so that when it is photocopied they get cut off and you cant read a whole article because of it.